Close X
Please select a star rating, add your review and submit.
*Your Name
*Your Email
*Paasword
Select a Star Rating
Add Your Comments
meters grade
 personal use
 commercial use
 
meter type
 AC Gaussmeters
 DC Gaussmeters
 Radiofrequency Meters
 Combination Meters
 Electric Field Meters
 Microwave Oven Leakage
 Probes and Accessories
 IR Ionizing Radiation Detectors
 Other Meters
 
clear
Author: ANONYMOUS
Visitors Rating:  
Number Reviews: 0
Read Reviews Write a Review
< > radiation refuge
 
 

VLF MAGNETIC PROBE


 

VLF MAGNETIC PROBE $150.00





Location
Country
State/Province
Suburb
Street
Contact Person
Contact Phone
Information / BuyMore Information / Best Price
 

Introduction
Outputs AC voltage corresponding to the AC magnetic field strength


Description
These passive magnetic field sensors output AC voltage corresponding to the AC magnetic field strength. The frequency of the AC output voltage is the same as the frequency of the magnetic field. Single-axis, so it responds to fields parallel to the sensor axis. The sensor orientation shows the magnetic field polarization. No battery or power supply is needed.



Connect to a display instrument (not included) such as AC voltmeter, oscilloscope or spectrum analyzer to display the output AC voltage and waveform information. These sensors have no minimum measurable field strength, so the sensitivity will depend on your display instrument. Maximum field: the sensor can be damaged above approximately 50 Volts output. Sensor includes operating instructions.



Frequency Range:

For 5 kHz - 1 MHz, the sensor output voltage is at least 70% of the magnetic field strength in Gauss (Volts/Gauss greater than 0.7). Sensors can also be used below this frequency range, but will have lower output voltage.



Calibration: Each individual sensor is tested and recorded to ensure NIST traceable accuracy. Individual calibration data table is delivered with each sensor.



Rectangular 1"x1"x0.8" and has a BNC (female) output connector on the case. Weighs only 1 oz (30 g).